HARLEY PARTS FOR SALE
- HD 32E GENERATOR END CAP
- Harley Knucklehead 32E GENERATOR END CAP CASTING AND BRUSH HOLDERS-1932-1957. Price-$45.00.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- AMP GAUGE BEZEL-EL, VL, UL
- Fits all white face HD amp gauges, including Hummer from 1934-1937 (later on Hummer). Exact duplicate, chrome, retainer also available @ $18.00
(used to hold lens in place). Price-$46.00.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PINION GEAR SHAFT
- Part # 355-15 (formely 174). 1915-1929 Tw. 61 & 74. Good usable original HD. Mild wear. Compare to repro at $170.00 Price-$85.00.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CATS EYE DASH LENS
- ORIGINAL HD Cats eye dash lens's and frame, missing one lens. Fits 1939-1946. Price-$28.00 pair
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 45" FLYWHEEL
- Left flywheel used from 1932-1973. Has crank pin and sprocket shaft (may not be useable). Good condition-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- DAMPER SPRINGS
- Original NOS HD. Price-$8.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SHIFTER SHAFT SWIVEL BEARING
- Type 2 with zerk fitting. Fits 61 & 74. Part # 2235-15. Original HD, NOT REPRO. Price-$52.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- RELAY BRACKET AND SCREWS
- Fits 1947-1964 OHV. Part # 4786-47 (new number-74765-47). Original HD, NOT REPRO, fresh chrome. Price-$22.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- INNER CHAIN GUARD REAR BRACKET-NOS
- Fits 1936-61" OHV, 1937-1948Part # 3806-36. Original NOS HD. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH HUB BEARING PLATE
- 1941-1948. Part # 2475-41. Original HD. Price-$12.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PUSH ROD BEARING
- 1939-1948. Part # 2448-39. Original HD. Price-$18.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH SPRING NUT SECTOR-NOS
- 1912-1929 61" & 74". Part # 2509-12. NEW OLD DEALER STOCK. Price-$8.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER CRANK GEAR-24 TOOTH
- 1936-61" OHV, 1937-1938 4 speed, 1939-1948. Part # 2144-36. Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BEARING HOUSING RETAINING PLATE
- 1936-61" OHV, 1937-1979 4 speed Big Twin. Part # 2162-36A. Original HD. Price-$8.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- ROLLER BEARING RACE OUTER
- 1917-1924. OD-2.750, ID-2.435, Width-.730, Outside lip-2.908. Part # 2284-17, formerly # 491. NEW OLD STOCK.
Price-$8.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH HUB BALL BEARING RETAINER
- Fits 1941-1948 74' & 80". Part # 2473-41. Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH HUB BALL BEARING RETAINER
- Fits 1941-1950 45". Part # 2473-41A. Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER BALL BEARING HOUSING
- Fits 1916-1929 61", 1921-1935 74" Twin. Part # 2126-16, formerly # 426. Original HD, good condition.
Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GEAR SHIFTING FORK AND GEAR LOCK PLATE SHAFT AND NUT
- Fits 1915-1929 61", 1921-1936 74" & 80". Part # 2241-15 & 2246-15, formerly # 462, # 465, and #463. Original HD,
good condition. Price-$32.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- MAINSHAFT THIRD GEAR
- Fits 1936-1957 61", 74" & 80". Part # 2296-36B. Original HD. Price-$32.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- MAINSHAFT LOW AND SECOND GEAR
- Fits 1936-61" Twins, 1937-1948 4 speed. Part # 2297-36. Good condition. Original HD. Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS 1915-1935 SLIDING GEAR FORK
- Part # 2247-15. World's largest collection of NEW OLD STOCK sliding gear forks. Original HD. Quanity discounts.
Fits 1915-1929 61", 1921-1935 74" Price-$8.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SLIDING GEAR FORK AND SHAFT
- Fits 1915-1929 61", 1921-1935 74". Part #'s 2247-15 & 2248-15. Original HD. Good condition. Price-$14.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SLIDING GEAR FORK SHAFT
- Fits 1915-1929 61", 1921-1935 74". Part # 2248-15. Original HD. Good condition. Price-$6.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- COUNTERSHAFT GEAR
- Fits 1916-1926 Twins. Parts # 2303-16 (formerly # 502), includes # 505 and #503. Good condition. Original HD.
Price-$225.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH DUST RING
- Fits 1920-1929-61", 1921-1935-74" Twins. Part # 2501-20 (formerly # 595). Original HD. OD-4.718", hole ID-1.358", hole OD-1.565".
Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- MAIN DRIVE GEAR
- Fits 1913-1926, all three speeds. Part # 2296-15 (formerly 498). Very good condition, no wear in sprocket slots.
Original HD. Price-$165.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- TRASMISSION COUNTERSHAFT AND THREADED BUSHING
- Fits 1916-1931 61" & 74" J, JD, V, VL. Part # 2300-16 (formerly # 748). Original HD. Some minor pitting on
races, may clean up with emery. Price-$26.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- TRASMISSION COUNTERSHAFT
- Fits 1916-1931 61" & 74" J, JD, V, VL. Part # 2300-16 (formerly # 748). Original HD. Some minor pitting on
races, may clean up with emery. Price-$18.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER COVER CAP, CLUTCH RELEASE FORK
- Fits 1926-1929 "61", 1926-1935 "74". Parts # 2133-26 & 2435-26. Original HD. TWO STYLES AVAILABLE.
Price-$85.00 a set
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH CRANK AND LOCK FINGER
- Fits 1915-1919 Three speeds. Part # 843, 848 & 849. Factory # DG549. Original HD. Price-$95.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FRAME BRACKET
- Fits 1915-1929-61" & 74". Part # 2231-15. Original HD. Price-$46.00 EACH
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH ACTUATING PLATE
- Fits 1919-1929 (61 & 74). Part # 2505-19. Original HD. Pins worn. Price-$32.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH RELEASE LEVER, AND CLUTCH RELEASE FORK
- Parts: 2426-26, 2435-26. 1926-1927 Twins. Price-$105.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BRAKE PULL
- Unsure year. New Old Stock. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BRAKE LOCK HANDLE AND BOLT
- Parts # 89102-37, 89108-37, 7691, 7035. 1937-1957 Knucklehead and Panhead. Original HD. Price-$95.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRACKET, HAND LEVER
- Part # 45023-65 (hand lever), 45030-65 (clamp), 1207W (screws). 1965-early 1969 Panhead, Shovelhead, Iron
head. Original HD. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FENDER RAILS AND MOUNTS
- Vintage original fender rails and mounts. #1-$65.00, #2-$54.00, #3-$72.00, #4-$32.00, #5-$18.00, #6-$18.00,
#7-$18.00.
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SEAT HAND RAIL
- Fits Buddy seat, Chum-me seat, solo seat. Harley Davidson or Indian. Rare piece. Nice original patina.19" long,
8 1/2" between holes. Price-$75.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON BUDDY SEAT HANDLES
- 1933-1952, EL, FL,VL,UL,WL. Part #s 52547-33. Price-$48.00 Pair-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON BUDDY SEAT HANDLE
- 1933-1952, EL, FL,VL,UL,WL. Part # 52547-33. Price-$25.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BUDDY SEAT PARTS
- Used on FL, FLH 1941-1964. Includes parts; 52596-36, Spring clip heavy (3), 52543-36, Plate, seat bar (2),
52600-36, Spring clip, light, 5674, Bolt, nut, washer.
- Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SEAT RAIL
- Used on Harley and Indian buddy/chum-me seats. Price-$75.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLAMP, WIRE
- Clamp to fit 1 1/4" tube. Original Harley Davidson. Used in 1930's up. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLAMP, WIRE
- Clamp to fit 1" tube. Original Harley Davidson. Used in 1930's up. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH ACTUATING ARM, CONNECTING LINK, PIN
- Fits 1915-1925. Parts # 856 (2434-19)-Clutch actuating arm, #853 (2439-15)-Connecting link, #858 (2441-19)-Connecting link
pin, # 0108-C.L.Pin nut. Original Harley Davidson. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PEDAL AXLE, WASHER, LOCKNUT AND NUT-NOS
- Fits 1915-1928-61" & 74", 1929-1948 Twins. Part # 2095-16. Price-$40.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PEDAL AXLE-NOS
- Fits 1915-1929-61" & 74", 1929-1948 Twins. Part # 2095-16. New old stock Harley Davidson. Price-$35.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BATTERY COVER-RADIO BATTERY
- Fits 1949-1962 FL, FLH. Part # 66376-49, fits battery # 66002-49AD. This is for the RADIO BATTERY,
51 amp hour-6 volt. Original Harley Davidson. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR
- 1937-1946 Base and shaft. Base part # 1566-37.
- Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR BASE
- 1947-1948 Base. Base part # 1566-47.
- Price-$38.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR
- 1947-1948 Base, shaft, points and cover. Base part # 1566-47.
- Price-$110.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR
- 1937-1946 Base, shaft. Base part # 1566-37.
- Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH PULL ROD
- Fits later 1919-1924. Part # 2445-19. Length 11". Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CURRENT AND VOLTAGE REGULATOR
- Fits 1958-1964 FL, FLH. Part # 74500-58A. Standard generator. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FRONT CYINDER-JD ERA
- Front cylinder, believed to be late 1922. BORE IS 3.43. Threads in good condition. No scratches in bore,
just some rusting. A couple broken fins, as can be seen. Valve seats appear to be in good condition. Has a "arrow"
stamped on the base, do your research. More pictures available on request. Price-$475.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR CYLINDER HEAD
- Fits 1929-1935 "45". This is the High Compression head, marked 5.5 compression. Part # 10-29A.
Includes a Leonard 5-HD spark plug in good condition. Price-$75.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- WHEEL OUTER STAR COVER
- Fits 1956-1966 all models. Price-$28.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FOOTBOARD STUD-NOS
- 1936 "61", 1937-1957 Big Twin. NEW OLD STOCK. Part # 2949-36
Price-$15.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH TUBE ASSEMBLY
- 1941-1957 "45". Part # 36975-41. Price-$18.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH TUBE ASSEMBLY
- 1947-up "45" three hole frame. Part # 36975-47. Price-$18.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CONNECTING LINK
- Fits all three speeds, 1915-1919. Part # 853. Original plating. Price-$22.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1936-1940 KNUCKLEHEAD-FLATHEAD CLUTCH HUB AND THRUST PLATE
- Fits 1936-61" OHV, 1937-1940. Part # 2741-36. Has crack from hub to stud (as pictured). Price-$18.00-Sh3
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPOTLIGHT BAR
- Original chrome, nice patina. Price-$48.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS GEAR LOCK PLATE
- Used on 1915-1925. Part # 2239-15. New old stock, original plating. Price-$45.00(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRAKE LEVER
- Part # 4056-30. Fits 1930 74" Tw. Price-$38.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- LIGHTWEIGHT CENTER STAND
- Unsure of year. Price-$125.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FRONT BRAKE DRUM
- Fits 1936-1948 Big Twin, 1941-1957 Servi car and WLC, 1937-1950 Servi car rear brake, 1937-1957 BT sidecar brake.
Origianl HD. Price-$85.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS INTAKE NIPPLE
- Fits 1940-1954 Big Twin. Inside diameter-1 9/16", OD-1 15/16", 1 3/4".
Price-$14.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD CHOKE CONTROL LEVER
- Used on 1938-1957. Part # 1233-38. Chrome. Price-$36.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD CHOKE CONTROL LEVER
- Used on Knucklehead era Linkert carbs. Price-$36.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 45" FRONT AXLE
- Length-9.1875, diameter-.375-24 thread. Part # 3910-30. Price $18.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- DRIVE DISC
- Part # 2489-19. Fits 1919 TO 1926 TWINS. Original HD. Price-$60.00-(Sh2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PULL ROD OUTER BALL RACE
- Part # 2452-26. Fits 1926 to first 1932-61" & 74". NOS. Original HD. Price-$38.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH SPRING COLLAR
- Part # 2547-26. Fits 1926-1928 Singles. NOS. Original HD. Price-$8.00 EACH-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPRING
- Overall length-3", diameter-9/16". Price-$6.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SHUT OFF ROD-PAN, KNUCK, FLATIE
- 1940-1964 Gas tank shut off rod. Fits Panhead, Knucklehead, Flathead tanks. Origianl HD. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRAKE LEVER BRACKET
- Rear mechanical. Fits 1936-1940 EL, 1941-1957 FL, 1936-1948 UL. Has been repaired on back of stud. Good
threads, some wear. Price-$24.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDECAR MUDGUARD BRAKE CLIP
- 1915-1922. Inner brake clip, sidecar mudguard. NEW OLD STOCK. Price-$16.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- AXLE NUT
- 11/16"-20. Price-$8.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CROSS SHAFT ARM
- Description to follow. Price-$16.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPRING WASHER-NOS
- Fits 1936-1948 Big Twin, 1940-1957 "45". Part # 54031-33. New old stock. Price-$8.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER GEAR ADJUSTER
- Fits 1916-1931 61" & 74". Part # 2134-16. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD SPARK PLUG # 2
- Fits Knucklehead era. Price-$85.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PLUNGER TUBE CAP
- Fits 1925-1935. Part # 3559-15. Price-$30.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 45" CLUTCH RELEASE LEVER
- Part # 37052-44. Fits 1944-1952 Solo, some WLA's. 2 1/8" wide. Selling the pair, one good, one fair.
Price-$55.00 pair
- E-mail: Indian Gauge LLC
-------------------------------------------------
- INNER PRIMARY "45"
- Part 3804-41. One good, one modified. Fits 1941-1963 "45". Original HD. Price-$35.00 Pair
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GEAR BOX COVER
- Singles and 45 Tw. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GEAR BOX COVER
- Fits later 1928-1929 Singles and 45 Tw. Part # 2260-28A. Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER COVER
- Fits 1919 up. Has some repair. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER COVER
- Fits later 1919-1925. Part # 2126-19. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON SPARK PLUG
- Has HD script, original vintage. Price-$10.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON SPARK PLUG
- Has HD script. Price-$10.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- POWER FLOW COMPENSATOR
- Made by Southern Products for pre-compensator Harleys, Panhead, Knucklehead. Takes the power pulses
out of the engine, smoothes out ride, saves drive train. Missing nut. Price-$150.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FISH TAIL
- Made by MCM mfg. co., Whittier, Ca. Fits 1 5/8 pipe. New old stock. 1950's vintage.
Nice on Bobbers, Baggers, etc. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FUEL FILTER
- 1950-1965. Filter and strainer. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- AXLE SPACER
- Fits .625 axle, 1.00 step. Price-$12.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HILLCLIMB GAS CAP
- This cap pressurized the tank for "slant artists", so they would get a constant supply of fuel on the
hillclimb. 1916-1935. Part # 3507-16 (cap #). Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- INSIDE HEADLAMP BULB MOUNT
- Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR AXLE SPACER
- For 9/16" axle, length 3 1/8", 3/4" diameter, 1 1/4" diameter step. Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- LIGHT SWITCH HOUSING
- 1929-1948 Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- WIRE FASTENING SCREW-NOS
- 1948-up. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- COVER-NOS
- Price-$24.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PUSH ROD/LIFTER END
- End diameter-9/16". Price-$14.00 each-2 available.
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR BRAKE ROD CLEVIS
- 1948-up. Price-$14.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR BRAKE ROD CLEVIS
- Part # 4067-30, 1936 "61" OHV, 1937-1948. Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRAKE CLEVIS
- Price-$12.00 each-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STEP WASHER
- Price-$3.00 each-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- RELIEF PIPE NUT
- 1918-1921. Part # 337. Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HORN BRACKET
- . Price-$35.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PIN
- Price-$8.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- WINTER WINDSHIELD MOUNT
- Price-$18.00-(1)
- E-mail: Indian Gauge LLC
----------------------------------------------------
- ROCKER FOOT CLUTCH SPRING
- Fits 1939-1943 EL, 1939-1942 UL. Original. Price-$25.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- HARLEY DAVIDSON SERVICE SHOP DOPE MANUAL
- Contains Service Shop(30 issues) plus bulletins (in factory binder): #256, Apr.10, 1947-Delco Remy Regulator bulletin (10 pages),
Generator wiring diagrams: #121G-Jan.30, 1940-Radio generator model 32E2R, #121-
Feb.14, 1935-1929-1945 generators, #121A-Feb.14,1935-1935-1930 and later Singles,
#121B, Feb.14-1935-Model 32E-32, later 45" & 74", #121C, Feb.14-1935-Model 30D,
1930 & 1931-45", #121D, Feb.14-1935-1930 & 1931 74",
#121E, Feb.14-1935-1929 & earlier Single, 61" & 74", Mar.24, 1947-
Transmission specs-Big Twin #256-1947 Wiring diagrams-four pages, 1947 Gear ratios,
Domestic and export (30 ratios for servi, side car, solo, alum. heads, iron heads, OHV,
Sidevalve-45", 61", 74", #221-motor fitting specs, #221G-Tuning specs, 1930 up, 74", 45", 30.50",
21 cu.in. in SV and OHV, #229-Model M Linkert rebuid, #218-Apr.4, 1941-crank case baffle
plates and connection rod arrangement-45", 1937 up, OHV, 1936 up, 74"-80" S.V., 1937 up,
#242-Feb.10, 1945-Roller bearing guide, #242A, Mar.4, 1946-Bearings, sizes and were used, #247
May 22, 1946-Connecting rod identification guide, 1932 & later-45", 74", 80"SV, 61" & 74" OHV,
#250-May 27, 1946-Crankpins, #251-July 1, 1946, Preventive maintanence, #252-Nov. 1, 1946-Tires,
wheels and speeds, #252A-Tire inflation, #254-Feb.1, 1947-Servi-car tow bar, plus more.
WILL NOT COPY!
Price-$325.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- BOLT, WINGNUT-HD
- Early, Price-$8.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- BOLT-HD
- Price-$3.00 Pair-(1)
- E-mail: Indian Gauge LLC
----------------------------------------------------
- FOOT REST, RIGHT AND LEFT
- Part # 11241-30, 1930-1936 74" & 80", Buddy seat parts. Price-$65.00 Pair
- E-mail: Indian Gauge LLC
----------------------------------------------------
- HD EARLY TRANS. PART
- Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1948-1952 SPEEDOMETER CABLE
- Fair to poor condition. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH ASSIST-"MOUSE TRAP"
- Missing adjusting screw. 1952-1967. Price-$125.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR AXLE SLEEVE-CHROME
- Fits 1936-1957 "74". Part 4008-36. Price-$26.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- "45" CAM COVER
- 1937-1959, Part#584-37A. Price-$225.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STAR HUB
- 1937-1954, All models. Price-$175.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BIG TWIN POSTCARD
- Showing early 1950's Panhead/Hydralic front end, with description on reverse. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- NOS. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- NOS. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- NOS. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPORTSTER "K" MODEL OIL PUMP BODY
- Pump body, oil pressure switch and fitting. Part labeled-2621552
- Price-$100.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- TAIL LITE AND HEADLIGHT CONNECTORS
- Used on 1920's-1930's tail lites and headlights. Price-$16.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS HD SPROCKET
- XR,XR750,KR,XRTT DIRT TRACK SPROCKET, 17 tooth countershaft sprocket, NOS in box
- Price-$55.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- NOS LAMP BRACKET PLATE
- Part # 2629-23, used on 1923-61" motors. New old stock. Original parkerizing
- Price-$55.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BATTERY CASE REAR BRACKET-NOS
- Part # 4415-24, Used in 1924, NOS
- Price-$45.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON/GOULDING SIDECAR HUB SHELL AND AXLE
- Goulding "Litecar" sicecar used on HD in 1929-1931, hub shell part # 6903-29, axle # 6885-29, includes # 6165-28A
- Goulding parts listed in "A Restoration Guide for 1929-1936 45" Twins. Price-$240.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD, HENDERSON, CROCKER, INDIAN, FLYING MERKEL SIDECAR AXLES
- Sidecar axles from teens to the thirties
- Price-$85.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------